Morse Hydra-Lift Drum Rollers easily lift and roll your closed drum. The built-in hydraulic system lifts your drum from floor level and places it quickly and easily for rotation. Morse drum rollers mix ingredients back into suspension and blend contents of 55 gallon drums without opening the barrel or exposing you to chemicals while the contents of a sealed drum are moving. You will eliminate the messy cleanup associated with insertion mixers, and reduce potential contamination, hazards and worker exposure to toxic chemicals.
| Item# |
Item Name |
|
Qty |
Add |
| 456-1-115 |
HYDRA-LIFT DRUM ROLLER, 5-20 RPM, 1-PHASE 115V MOTOR |
|
|
|
| 456-3-230 |
HYDRA-LIFT DRUM ROLLER, 5-20 RPM, 3-PHASE 230V MOTOR |
|
|
|
| 456-3-460 |
HYDRA-LIFT DRUM ROLLER, 5-20 RPM, 3-PHASE 460V MOTOR |
|
|
|
| 456-A |
HYDRA-LIFT DRUM ROLLER, 5-20 RPM, AIR MOTOR |
|
|
|
| 456-E1-115 |
HYDRA-LIFT DRUM ROLLER, 5-20 RPM, EXPLOSION-PROOF 1-PHASE 115V MOTOR |
|
|
|
| 456-E3-230 |
HYDRA-LIFT DRUM ROLLER, 5-20 RPM, EXPLOSION-PROOF 3-PHASE 230V MOTOR |
|
|
|
| GEK-456-1-115 |
KIT, ENCLOSURE W/ SAFETY INTERLOCK, FOR MODEL 456-1-115 |
|
|
|
| GEK-456-A |
KIT, ENCLOSURE W/ SAFETY INTERLOCK, FOR MODEL 456-A |
|
|
|
| GEK-456-E1-115 |
KIT, ENCLOSURE W/ SAFETY INTERLOCK, FOR MODEL 456-E1-115 |
|
|
|
| POLY-456FI |
KIT, ROLL POLY DRUM ON 456 SERIES, FIELD INSTALL |
|
|
|
| POLY-456 |
OPTION, ROLL POLY DRUM ON 456 SERIES |
|
|
|
| Check the items you wish to purchase, then click
|
|
More Information:
Hydra-Lift 55 Gallon Drum Rollers & Drum Mixers
Drum rollers make it easy to lift, mix and blend your closed drum safely and cleanly in your workshop or manufacturing plant.
Morse developed the basic Hydra-Lift Drum Roller concept to provide "hands-off" drum
handling and mixing. Enjoy the benefits of easy, ergonomic loading and
unloading and eliminate many hazards of manual drum handling. The built-in hydraulic system lifts your drum from floor level and places it quickly and efficiently for rotation.
Hydra-Lift Drum Rollers accept a steel drum in upright position at floor level (add Option POLY-456 to roll a plastic drum). You control the hydraulic powered drum tilt to lift the upright drum and place it down on drum rotator wheels. Start and stop drum rotation with a second control. You control the drum rolling speed. A 55-gallon (210 liter) drum can be rolled from 5 to 20 RPM (4 to 16 RPM on 50Hz models) as desired to thoroughly mix drum contents. Then return the drum to vertical to unload.
|
Benefits of mixing inside closed shipping drums
- Roll drum to mix again the settled ingredients
- Eliminate transfer, clean-up, and special vessels
- Use separate drum for each batch
- No container to purge between batches
- Nothing to insert into drum to mix
|
Model 456-3-230 Hydra-Lift Drum Roller
|
|
|
These Hydra-Lift
Drum Roller Models accept a steel drum in upright position. You control the
hydraulic tilt to lift an upright drum and place it down on drum rotator
wheels. Start and stop drum rotation with a second control. Roll a drum
at 5 to 20 RPM until contents are mixed as desired. Then return the
drum to vertical to unload.
|
Drum Rotators Save Time, Labor and Money!
|
|
 
Easy to Load by Hand Truck or Hoist
Load your upright drum onto drum turner with a below-hook drum lifter. Model 90 Verti-Karrier shown above.
Also can load and unload Hydra-Lift Drum Rotators with:
- MORSpeed Fork Truck attachments
- Model 81 Drum Spotter
 The ergonomic design of Hydra-Lift Drum Rollers allows you to load an upright drum at floor level.
Drum Roller Capacity
- 1,000 Lb. Liquid load
- 400 Lb. dry load. A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load.
- Roll steel drum: 6" to 26" (15 to 66 cm) diameter, maximum 40" (102 cm) length
- To roll a plastic drum, add Option # POLY-456
Overall dimensions: 67" (170 cm) long x 37" (94 cm) wide. See: Dimensional Information.
Available with choice of electric motors. Explosion proof motors available.
Enclosures for Hydra-Lift Drum Rollers
Enclosure outside post-to-post dimensions: 88"L X 40"W X 63.25"H (224 x 102 x 161 cm)
|
Install all Morse Rotators
in accordance with OSHA requirements for enclosure and safety
interlock, etc. Drum roller automatically turns off when enclosure door
is opened. Enclosures for Hydra-Lift Drum Rollers are 88"L X 40"W X
74"H.
For OSHA compliance, see OSHA subpart O.1910.212 "General
Requirements for all Machines." Power connections and motor controls
must comply with applicable codes.
|
|
Option # POLY-456
|
Option to roll your 55-gallon plastic drum on Hydra-Lift Drum Rollers
-
Extra wheels to support a flexible, soft-sided 55 gallon drum which lacks the ribs or roll rings of a steel drum
-
End stop prevents a plastic drum from traveling lengthways while being rolled
|
|
Option # 1-5-1
|
Idler Attachment to roll 1 to 5 gallon cylindrical can on a Hydra-Lift Drum Rotator.
-
Extends the usefulness of your rotator to roll 1 to 5 gallon cylindrical cans
-
Comes complete with adjustable spacers and mounts
-
Also see 5 Gallon Can Tumblers designed specifically to tumble 1 to 5 gallon cans / pails
|
Product Documents:
|
|
