|
Slide forks into fork pockets and secure to
carriage with chain. Forks must spread 25.5" (64.8 cm) apart to accommodate this fork mounted drum racker.
|
With the safety conscious MORStak TM Forklift Mounted Drum Rackers, you have the ability to move drums on and off racks, pallets, trucks, etc. with your forklift. Lift an upright drum and place in a horizontal position. Rack rimmed 55-gallon steel or plastic drums weighing up to 800 Lb. side by side with virtually zero clearance between them. Forklift mounted drum rackers feature battery powered tilt with self contained hydraulics. Before lifting an upright drum or tilting a drum from a horizontal position, these have a positive drum gripping mechanism that must be manually engaged. A 2-button pendant reaches back to the forklift operator to control drum tilting.
MORStak TM forklift mounted drum rackers include a 12V deep cycle battery and charger. These do not connect to the hydraulics or power of your forklift.
MORStak TM Forklift Mounted Drum Rackers
- Get rid of "bare fork" drum handling
- Move drum on and off rack, pallet, truck, etc.
- Control drum tilt from your forklift with battery-powered tilt
- Securely clamp the drum into the holder
- Lift the drum from upright or horizontal position
- Place the drum upright or horizontally
MORStak TM Forklift Mounted Drum Rackers handle ONLY a 55-gallon steel or plastic drum with top rim, and maximum weight of 800 Lb. These will NOT handle a smaller drum or a drum without a top rim.
-
Rack your 55-gallon steel drum
-
Rack your 55-gallon plastic drum with top rim when the included Drum Pads are installed
-
With each Forklift Mounted Drum Racker, Drum Pads are included
-
When the Drum Pads are installed, it reduces maximum drum cradle width from 19" (48.25 cm) to 13" (33 cm) for racking a 55-gallon drum
(Replacement Drum Pad Kit is available as part # 3313-P)
|
